Description
Version with patented TOP inflation device for tubeless tires
3 Working modes
Standard
Automatic (like G1200)
PC managed
Automatic mode
Place the upper roller on the rim edge.
Rotate the wheel and place the valve in start position.
Press start button and the tyre changer is ready to work in automatic mode (G1200 program).
Once the first wheel is done, the start position will be reached fast and automatically to repeat the job again and again.
Patented lever-free tool
Pneumatically operated bead breaker discs:
Built in scratch-proof material for complete rim protection.
The rim edge sensor allows the roller to move forward automatically, enabling it to work on the bead without damaging the tyre’s sidewall.
The central rim locking system, suitable also for reverse rims, consists of a central pin with cone. The effort is minimal thanks to the special plate on which the wheel lays. The plate is floating, therefore offering a self-locking mechanism.
3 adjustable working heights
Data bank: It is possible to memorize up to 100000 different wheels by:
client name
plate number
any notes
Data transfer: It is possible to transfer data among tyre changers – This is particularly useful when working with many tyre changers:
at the same location (large tyre shop, vehicle or tyre manufacturing plant)
at different locations (tyre shop chain, car dealer group)
Customized data and a quick training allow easy demounting of difficult tyres even by inexperienced workers.
PC managed operation
Fill in the tyre data.
The software automatically selects the best program among SOFT / STANDARD / RF/UHP – The user can decide to switch to another program (but the software does not allow programs which are not appropriate to that type of tyre).
Place upper and lower rollers at the rim edge and the valve at start position.
Press start button and the tyre changer will carry out the programmed job with minimum assistance.
At any time a job can be stopped and then continued with no need to start again the entire cycle.
Targeted job: The pre-set and dedicated cycle reduces working times
When turned on, the tyre changer asks to choose the requested function:
demounting/mounting tyres (standard operation)
repeated demounting (as removing tyres from rims at car wreckers)
repeated mounting (as in car manufacturing plants)
User-friendly console:
Simplifies the operator’s learning process
With buttons for operating the rollers and tools
Super fast:
Once a wheel is clamped on the plate, demounting and mounting (complete cycle) varies from 55 to 75 sec including run-flat and UHP.
Since 35 sec is the total time required to lift, lock, unlock and unload the wheel, the total time required for a complete cycle is as low as 90 – 110 sec from floor to floor position.
Invemotor: Speed set by the operator, exactly as required – Inverter with governor to protect the tyre
