Professional Installation 
Over 40 Years' Experience 
In-House After Sale Service 

3.5T MOT Brake Tester (Class 4)

Code: D412

3.5T MOT Brake Tester (Class 4)


3.5T MOT Brake Tester (Class 4)
Approved for use by the DVSA as MOT Connected Equipment, the D412 brake tester delivers fast, efficient testing. In standard configuration, the D412 can be used as a standalone MOT brake tester for use in traditional MOT bays. It can also be upgraded with a vehicle weighing system for motorcycle testing & DVSA approved Automated Test Lanes.

Using the latest SW900 software, every test is stored automatically should it ever need recalling, & remote 'over the internet' assistance is built-in allowing our engineers to connect immediately & diagnose your system remotely.

The chassis is fully galvanised and then painted with a durable, hard-wearing industrial finish. Rollers are supported with a five-year guarantee and are manufactured with longevity in mind. The D412 easily deals with the extreme demands of modern day brake testing & busy MOT Stations. It has a load capacity of 3,500kg & the whole test (non-ATL) can be operated wirelessly using our radio frequency ruggedised RFC-95 remote control.

Approved for UK MOT Classes 1,2,3 and 4, this model benefits from four-wheel drive (4WD) brake testing as standard & automatic efficiency calculation for simple pass / fail test results.

Approved as Connected MOT Equipment
Galvanised & painted rollers
Roller surface guaranteed for 5 years
Installation cartridges galvanised & painted
Single bed symmetrical chassis
Very latest DVSA ATL software
Remote on-line support (OSS)
Every official test saved automatically
Customer database with testing statistics
Emissions software included as standard
4WD testing as standard
High quality RFC-95 remote control (50+ range)
22" flat panel LED display (touch screen optional)
40"+ secondary display (optional)
Motorcycle testing compatible (optional)
All software and electronics made in UK

Power (Full Load): 3ph 400V / 50 Hz / 32A
Motors - 3ph: 2 x 3.0 kW
Electronics: USB Interface - PC Controlled
Brake Testing Speed: 2.9 km/h
Roller Bed(s) Weight & Build: 425 kg – Fully Galvanised & Painted
Max. Brake Force (per wheel): 900 kgf
Max. Axle Load: 3500 kg
Roller Width: 700 mm
Roller Centres Dimension: 420 mm
Friction Roller Surface: 0.9 ? dry, > 0.6 wet
Roller Bed Chassis Dimensions: 2340 x 660 x 300 mm (L x W x H)
Display Dimensions: LED Monitor, 22" standard (larger optional)
Control System: GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)
Communication: USB
Operator Control: Keyboard / RF Remote Control (50m+ range)
Axle Weighing System: Optional (D412W)

View PDF Brochure Here:

Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings